Camera firmware
Cameras / LSC Smart Indoor IP Camera
Camera profile

LSC Smart Indoor IP Camera

Fixed-view indoor camera with a native Fullhan video backend and manual infrared controls.

LSC Smart Connect Smart Indoor IP Camera retail packaging, showing the fixed camera and 1080p HD label Fixed view
Identify the hardware first. Check the chip marking FH8626V100 and the MIS2006 sensor revision. The product name or enclosure alone is not enough to choose firmware.

Hardware

Chip
Fullhan FH8626V100
Sensor
MIS2006
CPU
arm1176jzf-s
Flash
8 MiB
Configurationlsc-smart-indoor

Firmware support

Own native media backend. The Tuya application is excluded from the built runtime. Original kernel, hardware modules and selected runtime libraries are retained.

Builds produce test candidates. Installing a release requires exact-image boot qualification.

Build this configuration

First prepare the original firmware inputs and signing key using the build guide. Toolchain installation uses the bundled archive offline.

python3 tools/toolchain.py --board lsc-smart-indoor
./compile-sd.sh --config lsc-smart-indoor
Build guide

GPIO configuration

FeatureProfile settings
ircut{"driver": "dual_gpio_pulse", "flip": 1, "pins": [19, 20], "pulse_us": 300000}
ir_led{"active_level": 1, "driver": "gpio", "pin": 3}
status_led{"channels": [{"active_level": 0, "name": "red", "pin": 2}, {"active_level": 0, "name": "green", "pin": 6}], "driver": "gpio_channels"}
reset{"active_level": 0, "driver": "gpio", "hold_seconds": 5, "pin": 23}
Board profile