Camera profile
LSC Smart Rotatable Camera
Motorised indoor camera with pan and tilt, touch-and-hold control, audio and infrared night vision.
Pan and tiltIdentify the hardware first. The verified chip is marked ANYKA AK3918EN080 V300S. This profile uses the AK39EV330 backend with the MIS2006 sensor. Other revisions need their own investigation.
Hardware
- Chip
- Anyka AK3918EN080 V300S / AK39EV330
- Sensor
- MIS2006
- CPU
- arm926ej-s
- Flash
- 8 MiB
Configuration
lsc-smart-rotatableFirmware support
Interim SDK-host backend: original application main is blocked, but proprietary vendor SDK code remains for media support. The updater replaces APP only.
Builds produce test candidates. Installing a release requires exact-image boot qualification.
Build this configuration
First prepare the original firmware inputs and signing key using the build guide. Toolchain installation uses the bundled archive offline.
python3 tools/toolchain.py --board lsc-smart-rotatable
./compile-sd.sh --config lsc-smart-rotatableGPIO configuration
| Feature | Profile settings |
|---|---|
| ircut | {"day_level": 1, "driver": "latched_gpio", "enable_level": 1, "enable_pin": 67, "select_pin": 6, "settle_us": 50000} |
| ir_led | {"active_level": 1, "binding": "ir_led", "driver": "led_class", "name": "ir_led", "pin": 7} |
| status_led | {"active_level": 1, "binding": "status_led", "driver": "led_class", "name": "state_led", "pin": 42} |
| reset | {"active_level": 0, "binding": "reset", "code": 116, "device": "/dev/input/event0", "driver": "evdev", "hold_seconds": 5, "pin": 5} |